Scart Stil

[Pin lay-out]
Male front view


RGB Connection

Output connectorInput connector
1Audio right out2Audio right in
3Audio left (or mono) out6Audio left (or mono) in
4Audio return4Audio return
7Blue out7Blue in
5Blue return5Blue return
11Green out11Green in
9Green return9Green return
15Red out15Red in
13Red return13Red return
16RGB status out16RGB status in
14RGB status return14RGB status return
19Sync (composite video) out20Sync (composite video) in
17Sync return18Sync return
21Shield21Shield


S-Video Connection

Output connectorInput connector
1Audio right out2Audio right in
3Audio left (or mono) out6Audio left (or mono) in
4Audio return4Audio return
15Chrominance out15Chrominance in
13Chrominance return13Chrominance return
8Video status out8Video status in
19Luminance out20Luminance in
17Luminance return18Luminance return
21Shield21Shield


Composite Video Connection

Output connectorInput connector
1Audio right out2Audio right in
3Audio left (or mono) out6Audio left (or mono) in
4Audio return4Audio return
8Video status out8Video status in
19Composite video out20Composite video in
17Composite video return18Composite video return
21Shield21Shield


(Composite) Decoder Connection

Receiver connectorDecoder connector
1Audio right out2Audio right in
2Audio right in1Audio right out
3Audio left out6Audio left in
6Audio left in3Audio left out
4Audio return4Audio return
8Video status in8Video status out
19Baseband out (scrambled)20Baseband in
17Baseband out return18Baseband in return
20Composite video in (unscrambled)19Composite video out
18Composite video in return17Composite video out return
21Shield21Shield


EasyLink Connection (additional)

Television connectorVideo recorder connector
10I/O Control Bus10I/O Control Bus

EasyLink enables bi-directional communication between a television set and a video recorder. This way a video recorder can, for example, copy the channel settings of the television set. Who knows the details?


Signal Levels

SignalAC levelDC levelImpedance
Red, green, bluePeak to blanking: 0...0.7 V ±3 dB0...2 V75 Ohm
SyncPeak to peak: 0...0.3 V -3 dB...+10 dB0...2 V75 Ohm
Composite videoWhite to sync: 0...1.0 V ±3 dB0...2 V75 Ohm
Chrominance0...0.3 V -3 dB...+10 dB0...2 V75 Ohm
Luminance0...1.0 V ±3 dB0...2 V75 Ohm
MACBlack to white: 0...1.0 V ±3 dB0...2 V75 Ohm
Audio in0.2...2.0 V (nominal: 0.5 V)>=10 kOhm
Audio outNominal: 0.5 V (maximum: 2.0 V)<=1 kOhm
Video status Low data rate communication: 0.0...2.0 V
(e.g. remote control; Easylink)
Internal: 0.0...2.0 V
External (16:9): 4.5...7.0 V
External (4:3): 9.5...12.0 V
In: ZR>=10 kOhm
ZC<=2 nF
Out: ZR<=1 kOhm
RGB statusInternal: 0.0...0.4 V
External: 1.0...3.0 V
75 Ohm


This page was last updated 10 .feb. '03 by rvinge@daimi.au.dk

URL: http://www.daimi.au.dk/~rvinge/doc/kabler/Rasmus_scart_stk.html